Automatic Six Head Vial Filling & Stoppering Machine

Automatic Six Head Vial Filling & Stopperring Machine Works On Volumetric Liquid Dispensing Principle With Diving Nozzles. The Unit Is Made Compact, Versatile And Enclosed In Stainless Steel Elegantly Matt Finish Body, Consists Of Delrin Conveyor, Reciprocating Nozzle With Self-centering Devices & SS Syringe.

  • ± 1 % Filling accuracy on single dose.
  • Suitable for 1 ml to 100 ml feeling range.
  • Immediately stopper closing on vial after feeling.
  • Inbuilt scrambler and Unscrambler.
  • No Vial No Filling System.
  • “No Rubber Stopper machines stop “system.
  • Rigid vibration free construction for trouble free performance.
  • S.S. Elegantly matt finished body.
  • Minimum charge overtime, from one size to another container or fill size.
  • Self-lubricating UHMW-PE guide profile for S.S. slat chain provides low friction wear surface, smooth and noiseless conveying.
  • Vial Stopping arrangement through Pneumatic system.
  • Separate A/c drives for main motor & conveyor belt.
  • Safety guard for conveyor gearbox, motor and pneumatic cylinders.
  • Inbuilt protection against over current, voltage fluctuation, short circuit in A/c frequency drive
  • NKLFRS-150 Automatic Six Head vial filling with Rubber Stoppering Machine is a compact model used for filling and rubber Stoppering of injectable liquid into vials.
  • The incoming dry vial (sterilized and siliconised) are fed through unscrambler and suitably guided on the moving delrin slat conveyor belt at the required speed of the correct placement below filling unit.
  • The filling unit consists of Filling Head, Syringes & Nozzles which are used for liquid filling. The syringes are made of S.S. 316 construction and both glass as well as S.S. syringes can be used (Customer can choose any on between them).
  • A Star Wheel is provided which holds vial during filling operation. A sensor is provided for ’’No Vial, No Filling’’ operation. Syringes are mounted on eccentric block and driving through bottom main gear box. Volume can be either increased or decreased by increasing or decreasing stroke length of piston as per filling size. Syringes is having non return valve for sucking and delivering situation to avoid volume variation. Liquid will reach to filling nozzles through silicon transparent pipe. Nozzle will be having Up and Down movement with help of cam mechanism and it will come down when vial will be hold by star wheel for filling operation and starts filling when it starts to move up and after completion of filling operation, star wheel delivers six vials together on conveyor for rubber Stoppering operation.
  • Stoppering unit consist of Star wheel, Vibrator unit and Bowl. The sterilized and siliconised rubber stoppers stored in the vibrator bowl moves vertically to the rubber stopper chute. The vial is hold firmly by star wheel, which will be in continuous rotary motion and vial which is coming from filling unit get in to star wheel and move in rotary direction along with star wheel, during movement it will pick up the rubber stopper from the exit end of the chute and rubber stopper will be pressed by fix single pressing roller, which is spring loaded.
  • Then vial further move on conveyor and collected on out feed star wheel for next sealing operation.




Up to 9000 *

Direction of Movement

Left to Right

Number of head/Syringe

6 Nos.

Fill Size***

1 ml to 100 ml

Power Consumption**

Main Machine

1.50 HP / 415 Volts / 50 Hz.


0.25 HP / 415 Volts / 50 Hz.


0.25 HP / 415 Volts / 50 Hz.


0.25 HP / 415 Volts / 50 Hz.

Stopper feeding bowl

300 watt magnetic coil

Height of Conveyor**

850 mm to 900 mm Adjustable.

Machine Dimension

3000 mm (L) x 1155 mm (W) x 1450 mm (H)

Shipping box Dimensions

3200 mm (L) x 1350 mm (W) x 1600mm (H)

Net Weight

1200 kgs

Gross Weight

1700 kgs.

Container Size**

Ø  Ø 14 mm to Ø 52 mm***  ( vial)

Ø  Up to 120 mm height.

Ø  Suitable for 1 ml to 100 mm vials.


Ø  13 mm to 20 mm ***

Ø  Special case – 32 mm


 Note :           

  • * Depends on Vial size.
  • ** We can supply as per customer requirements.
  • *** With help of change parts.
  • Automatic conveyor washing system.
  • Nitrogen flushing before and after filling.
  • PLC Control with Audit trail facility
  • Acrylic cabinet or toughened Glass safety cabinet.
  • On line pre inspection system.
  • Float tank (Holding tank) with or without stirrer.


Electrical supply

3 Phase + Neutral + Earthing

Electrical load

2.25 HP. 1.70 KW @ 50HZ

Air Pressure

6 bar pressure 0.5 CFM

Vial Filling With Rubber Stoppering Machine

Contact Us