Automatic Bottle Capping Machine


Automatic Bottle Capping Machine Is A Compact Model Used For Sealing Of Screw Cap On The PET Jars.

  • Parts coming in contact with the Plastic bottle / Screw Plastic cap / exposed to the atmosphere are made out of S.S 304.
  • Star wheel and back guide set are made of Nylon material for long lasting life.
  • Single motor synchronizes conveyor, star wheels and platform turret and speed can be varied by the % speed pot on operating panel.
  • A Special clutch device is incorporated in Star wheel system for stoppage of machine in the event of plastic bottle is over turned or over diameter.
  • photo sensing device to stops machine automatically in the event of no plastic screw cap in delivery chute.
  • Specially design Jaw type head for torque adjustment. (Due to this there shall be no damage to the thread of the cap and correct cap application is done. SO there will be no complaint for loose capping)
  • Damage cap quantity can be reduced by adjusting the gap in vibrator unit.
  • A BANNER USA MAKE Fiber optic photocell for cap feeder orientation for automatic control for reducing cap damaging.
  • Imported Gear Motor & Gear box for Main drive.
  • Control technique, UK Make A.C. Frequency drives for Main drive.
  • Digital Counter for counting number of sealed BOTTLE.
  • No Bottle and no cap system for reducing the cap wastage and to yield the higher production.
  • “No Seal in Chute, Machine Stops System”


  • In Automatic Bottle Capping Machine ,Bottles are continuously fed from upstream machine to the flat conveyor belt of Screw cap sealing machine and move further through in feed worm for correct spacing between two bottles and transferred to the in feed star wheel.
  • Screw caps kept in Vibratory unit automatically orient caps in right direction before entering into delivery chute.
  • And Bottle /Jars are entering below jaw type sealing head (with torque adjustment) and bottle will be sealing perfectly.
  • After sealing operation, sealing head moves upward with help of cam and bottle /jars move with exit star wheel and Move further on conveyor belt for next operation.



Left To Right.

Electrical Supply

1.00 HP For Main Drive


40 to 50 bottle / Minute depends upon dia of bottle

No of Sealing Head

Single (Screw capping head)

Power Requirement

230 Volts, 1 Phase 50 Hz.

Height of Conveyor

Adjustable from 800 To 850 MM


1530 MM (L) X 850 MM (W) X 1900 MM (H)

Net Weight

550 KGS (Approx.)

Gross Weight

740 KGS (Approx.)

Jar Diameter

22 mm to 100 mm


15 mm to 100 mm

Screw Caps

Dia: 22 mm to 56 mm

Height : 15 mm to 18.3 mm

Contact Us